There are two rails on a snowboard; each comprised of a sidewall and an edge.
A term used to describe making fast and hard turns. e.g. “He was railing around that turn before he slid out.”
To slide the rails of the snowboard onto almost anything, other than a flat slope. Some good rail sliding surfaces include: fallen tree branches/logs, the coping of a halfpipe, a picnic table.
Reaction Injection Molding (RIM)
Snowboard construction in which a wood core is placed into a mold, and resin is injected into the mold around the core. These boards are very durable and efficient to make, but are sometimes a little heavy.
The trailing hand closest to the tail of the snowboard. In other words, the right hand for regular footers and the left hand for goofy footers.
The foot mounted closest to the tail. A regular-footers right foot and a goofy-footers left foot.
Riding on a snowboard with the left foot in the forward position. In other words, the left foot is closest to the nose, furthest from the tail, and in between the right foot and the nose.
To switch from riding fakie to forward, or from forward to fakie, usually while the snowboard is still touching the ground.
A term used to describe any maneuver where a rotation is initiated, stopped, and its’ momentum reversed.
Roast Beef Air
The rear hand reaches between the legs and grabs the heel edge between the bindings while the rear leg is boned.
The opposite of camber. Some early snowboards were built with rocker, presumably for riding in powder.
The front hand grabs the toe edge in front of the front foot (mute) and the back leg is boned while the board points perpendicular to the ground.
An inverted frontside 540. Off of a straight jump, it feels like doing a backflip and landing riding fakie. In the halfpipe, it is more like performing a 540 degree rotation which is inverted and off-axis.
Rolling down the windows
A phrase used to describe when someone is caught off balance and they
rotate their arms wildly in the air to try and recover.
The very top horizontal portion of the halfpipe wall where one can stand and look into the halfpipe. Also used as a walkway in order to hike to the top of the halfpipe.
The length of the base of the snowboard which touches the snow.
A term used to describe any handplant where the front leg is boned for style.
Sandwich Laminated Construction
Snowboard construction which is the most labor intensive and therefore the most expensive to make. Can use either foam or wood core and usually provides the lightest weight and most lively flex.
The front hand reaches across the body and grabs the tail while the front leg is boned.
Steel edges which do not form one or two solid pieces around the edge of the snowboard. Snowboards with segmented edges usually have many pieces around the nose and tail. They are less durable, but easier to replace than solid steel edges.
A name for a certain interval in which one snowboards. e.g. “That was a good halfpipe session, but the powder session was even better.”
720 Air (a.k.a. seven)
The snowboarder rotates 720 degrees in the air and lands riding forward. In the halfpipe, the rider approaches the wall riding forward, rotates 720 degrees, and lands riding fakie. Of course, it may also be performed switchstance by riding fakie and landing riding forward.
A grabless trick where the upper torso and lower body are twisted in opposite directions and then returned to normal. Usually the front leg is boned.
The lifted or upward curved sections of a snowboard at the tip and tail.
An expression used to describe something exceptionally good.
The measure (usually in cm) of the circle radius to which the sidecut of a snowboard corresponds. A small circle or sidecut (under 900cm) will make tighter turns than a large sidecut (over 900cm).
High molecular-weight base formed by the heating and compression of small fragments of P-tex. Sintered bases absorb and hold wax better and are more durable than extruded bases, i.e. they are faster.
The act of riding along precariously and near falling.
The front hand grabs mute, the back leg is boned, and the board is kept parallel with the ground.
A freestyle event in which the competitor rides over a series of various kinds of jumps. He or she is then judged on the performance of tricks and maneuvers.
A lip trick where one slides with the coping perpendicular to the snowboard, the front leg is boned, and the nose is oriented below the coping while the tail is above. This is another skate trick that doesn’t really make sense in snowboarding.
Footwear designed for use in freestyle and freeride snowboarding. Boots are soft and pliable and allow a large range of motion while maintaining sufficient support.
A term used to describe someone who cuts in front of you in the lift line, or drops in front of you in the halfpipe.
The rear hand reaches between the legs and behind the front leg to grab the toe edge in front of the front foot while the back leg is boned.
If you are approaching a jump too fast, you may need to slow down by making quick speed check. In other words, sliding sideways to slow down.
A snow sculpted jump which has two transitional walls coming together to form a spine. One may air off either side and land on the other.
A nose of a snowboard which is shaped so the edges curve up like a spoon.
The front hand reaches between the legs and grabs the heel edge between the bindings while the front leg is boned.
When a maneuver is performed such that the point of emphasis in the maneuver is held or “stalled” for an extended period of time. Usually the best time to take a picture.
A series of ledges where one jumps down from one to the next. For example, a staircase could be on a naturally occurring cliff jump or on a manmade BoarderCross course.
The position of one’s feet on the snowboard. Includes: stance types, such as regular or goofy, and also stance specifications, such as widths and angles.
Binding system in which no major manual adjustment is needed in order to attach and detach the boot from the binding. You simply “step in” and then pull a lever to “step out”. It has been developed for hard as well as soft boot binding configurations.
1. Another name for a snowboard.
2. A term used to describe making a good landing. e.g. “He stuck a huge Method Air off of that jump.”
Any maneuver in which both legs are boned and a grab is incorporated, i.e. Mute Stiffy.
Riding with the legs spread open, (knees apart).
An alternate term for the word psyched. In other words, to be excited.
A term used to describe making a good landing. e.g. “He stomped that McTwist.”
The no slip pad attached to the snowboard between the bindings for aiding in getting on and off the lift with the rear foot out of the binding.
A maneuver similar to the Method Air; only once the knees are bent, the front hand reaches under the base of the snowboard to grab the toe edge.
Swiss Cheese Air
The rear hand reaches between the legs behind the front leg and grabs the heel edge in front of the front foot while the back leg is boned.
The term for performing a trick while riding fakie (backwards). It is important to note that it’s a specific term given to a maneuver which is performed exactly like riding forwards. The only difference is the rider is going backwards, hence the term “switched stance”. Thus, any trick may be performed switchstance. Also, see Fakie
A jump in which the take off and landing is connected by a long flat surface. Ideally, one wants to clear the “table” and land on the down slope.
The rear tip of the snowboard.
Tail Grab Air
The rear hand grabs the tail of the snowboard.
Any maneuver where you bone your rear leg and “poke” the tail of the snowboard in a direction away from your body, usually while grabbing.
To slide along the ground or an object solely on the tail of the snowboard.
See Tail Bonk
To ride solely on the tail of the snowboard with the nose in the air.
The front hand reaches behind the front foot and grabs the toe edge between the bindings. The front knee is then bent to touch the board tuck knee style.
360 Air (a.k.a. three)
The snowboarder rotates 360 degrees in the air and lands riding forward. In the halfpipe, the rider approaches the wall riding forward, rotates 360 degrees, and lands riding fakie. This trick may also be performed by riding fakie and landing riding forwards; in which case it is called a Caballerial. See Caballerial
A snowboard has two different edges. The toe edge is the one at which the toes rest.
If the bindings of a snowboard are mounted so that the toe hangs off the edge, the toe may drag, catch in the snow, and cause one to slide out while turning.
Making a turn on your toe side edge.
The radial curved section of a halfpipe wall between the flat bottom and the vertical. A snowboarder pumps and rides the transition to gain speed, to catch air, and to land.
To ride perpendicular to the fall line. A halfpipe rider traverses from wall to wall in the halfpipe.
A crouched position of low wind resistance used to attain higher speed.
A technique where one knee is bent and the ankle bent sideways in order to touch the knee to the snowboard between the bindings. (e.g.. Tuck Knee Indy Air).
1. A term used to explain the emphasis of style in a trick. In other words, if someone “tweaked out a method” they would grab hard and create an emphasis of the maneuver such that their ankles or other joints may appear bent or twisted to a maximum degree. 2. A term used to describe an injury. i.e. “He tweaked his ankle.” 3. Someone who isn’t quite right, “He is seriously tweaked.”
A snowboard which has both nose and tail shaped identically. The board is meant to ride the same both ways.